Detailed Description

Write a trajectory in the Lammps dump format.

Definition at line 28 of file tools/analyzers/LammpsDumpWriter.h.

#include <LammpsDumpWriter.h>

Inheritance diagram for Tools::LammpsDumpWriter:

Public Member Functions
	LammpsDumpWriter (Processor &processor)
	Constructor. More...

	LammpsDumpWriter (Configuration &configuration, FileMaster &fileMaster)
	Constructor. More...

virtual	~LammpsDumpWriter ()
	Destructor. More...

void	writeFrame (std::ofstream &file, long int iStep)
	Read a single frame. More...

Public Member Functions inherited from Tools::TrajectoryWriter
	TrajectoryWriter (Processor &processor, bool isBinary)
	Constructor. More...

	TrajectoryWriter (Configuration &configuration, FileMaster &fileMaster, bool isBinary)
	Constructor. More...

virtual	~TrajectoryWriter ()
	Destructor. More...

virtual void	readParameters (std::istream &in)
	Read parameters and initialize. More...

virtual void	setup ()
	Open the trajectory file. More...

virtual void	sample (long iStep)
	Write frame to file. More...

virtual void	clear ()
	Clear nSample counter. More...

virtual void	output ()
	Close ouput file. More...

Public Member Functions inherited from Tools::Analyzer
	Analyzer (Configuration &configuration)
	Constructor. More...

	Analyzer (Processor &processor)
	Constructor. More...

	Analyzer (Configuration &configuration, FileMaster &fileMaster)
	Constructor. More...

virtual	~Analyzer ()
	Destructor. More...

int	interval () const
	Get interval value. More...

bool	isAtInterval (long counter) const
	Return true iff counter is a multiple of the interval. More...

Public Member Functions inherited from Util::ParamComposite
	ParamComposite ()
	Constructor. More...

	ParamComposite (const ParamComposite &other)
	Copy constructor. More...

	ParamComposite (int capacity)
	Constructor. More...

virtual	~ParamComposite ()
	Virtual destructor. More...

void	resetParam ()
	Resets ParamComposite to its empty state. More...

virtual void	readParam (std::istream &in)
	Read the parameter file block. More...

virtual void	readParamOptional (std::istream &in)
	Read optional parameter file block. More...

virtual void	writeParam (std::ostream &out)
	Write all parameters to an output stream. More...

virtual void	load (Serializable::IArchive &ar)
	Load all parameters from an input archive. More...

virtual void	loadOptional (Serializable::IArchive &ar)
	Load an optional ParamComposite. More...

virtual void	loadParameters (Serializable::IArchive &ar)
	Load state from archive, without adding Begin and End lines. More...

virtual void	save (Serializable::OArchive &ar)
	Saves all parameters to an archive. More...

void	saveOptional (Serializable::OArchive &ar)
	Saves isActive flag, and then calls save() iff isActive is true. More...

void	readParamComposite (std::istream &in, ParamComposite &child, bool next=true)
	Add and read a required child ParamComposite. More...

void	readParamCompositeOptional (std::istream &in, ParamComposite &child, bool next=true)
	Add and attempt to read an optional child ParamComposite. More...

template<typename Type >
ScalarParam< Type > &	read (std::istream &in, const char *label, Type &value)
	Add and read a new required ScalarParam < Type > object. More...

template<typename Type >
ScalarParam< Type > &	readOptional (std::istream &in, const char *label, Type &value)
	Add and read a new optional ScalarParam < Type > object. More...

template<typename Type >
CArrayParam< Type > &	readCArray (std::istream &in, const char label, Type value, int n)
	Add and read a required C array parameter. More...

template<typename Type >
CArrayParam< Type > &	readOptionalCArray (std::istream &in, const char label, Type value, int n)
	Add and read an optional C array parameter. More...

template<typename Type >
DArrayParam< Type > &	readDArray (std::istream &in, const char *label, DArray< Type > &array, int n)
	Add and read a required DArray < Type > parameter. More...

template<typename Type >
DArrayParam< Type > &	readOptionalDArray (std::istream &in, const char *label, DArray< Type > &array, int n)
	Add and read an optional DArray < Type > parameter. More...

template<typename Type , int N>
FArrayParam< Type, N > &	readFArray (std::istream &in, const char *label, FArray< Type, N > &array)
	Add and read a required FArray < Type, N > array parameter. More...

template<typename Type , int N>
FArrayParam< Type, N > &	readOptionalFArray (std::istream &in, const char *label, FArray< Type, N > &array)
	Add and read an optional FArray < Type, N > array parameter. More...

template<typename Type >
CArray2DParam< Type > &	readCArray2D (std::istream &in, const char label, Type value, int m, int n, int np)
	Add and read a required CArray2DParam < Type > 2D C-array. More...

template<typename Type >
CArray2DParam< Type > &	readOptionalCArray2D (std::istream &in, const char label, Type value, int m, int n, int np)
	Add and read an optional CArray2DParam < Type > 2D C-array parameter. More...

template<typename Type >
DMatrixParam< Type > &	readDMatrix (std::istream &in, const char *label, DMatrix< Type > &matrix, int m, int n)
	Add and read a required DMatrix < Type > matrix parameter. More...

template<typename Type >
DMatrixParam< Type > &	readOptionalDMatrix (std::istream &in, const char *label, DMatrix< Type > &matrix, int m, int n)
	Add and read an optional DMatrix < Type > matrix parameter. More...

template<typename Type >
DSymmMatrixParam< Type > &	readDSymmMatrix (std::istream &in, const char *label, DMatrix< Type > &matrix, int n)
	Add and read a required symmetrix DMatrix. More...

template<typename Type >
DSymmMatrixParam< Type > &	readOptionalDSymmMatrix (std::istream &in, const char *label, DMatrix< Type > &matrix, int n)
	Add and read an optional DMatrix matrix parameter. More...

Begin &	readBegin (std::istream &in, const char *label, bool isRequired=true)
	Add and read a class label and opening bracket. More...

End &	readEnd (std::istream &in)
	Add and read the closing bracket. More...

Blank &	readBlank (std::istream &in)
	Add and read a new Blank object, representing a blank line. More...

void	loadParamComposite (Serializable::IArchive &ar, ParamComposite &child, bool next=true)
	Add and load a required child ParamComposite. More...

void	loadParamCompositeOptional (Serializable::IArchive &ar, ParamComposite &child, bool next=true)
	Add and load an optional child ParamComposite if isActive. More...

template<typename Type >
ScalarParam< Type > &	loadParameter (Serializable::IArchive &ar, const char *label, Type &value, bool isRequired)
	Add and load a new ScalarParam < Type > object. More...

template<typename Type >
ScalarParam< Type > &	loadParameter (Serializable::IArchive &ar, const char *label, Type &value)
	Add and load new required ScalarParam < Type > object. More...

template<typename Type >
CArrayParam< Type > &	loadCArray (Serializable::IArchive &ar, const char label, Type value, int n, bool isRequired)
	Add a C array parameter and load its elements. More...

template<typename Type >
CArrayParam< Type > &	loadCArray (Serializable::IArchive &ar, const char label, Type value, int n)
	Add and load a required CArrayParam< Type > array parameter. More...

template<typename Type >
DArrayParam< Type > &	loadDArray (Serializable::IArchive &ar, const char *label, DArray< Type > &array, int n, bool isRequired)
	Add an load a DArray < Type > array parameter. More...

template<typename Type >
DArrayParam< Type > &	loadDArray (Serializable::IArchive &ar, const char *label, DArray< Type > &array, int n)
	Add and load a required DArray< Type > array parameter. More...

template<typename Type , int N>
FArrayParam< Type, N > &	loadFArray (Serializable::IArchive &ar, const char *label, FArray< Type, N > &array, bool isRequired)
	Add and load an FArray < Type, N > fixed-size array parameter. More...

template<typename Type , int N>
FArrayParam< Type, N > &	loadFArray (Serializable::IArchive &ar, const char *label, FArray< Type, N > &array)
	Add and load a required FArray < Type > array parameter. More...

template<typename Type >
CArray2DParam< Type > &	loadCArray2D (Serializable::IArchive &ar, const char label, Type value, int m, int n, int np, bool isRequired)
	Add and load a CArray2DParam < Type > C 2D array parameter. More...

template<typename Type >
CArray2DParam< Type > &	loadCArray2D (Serializable::IArchive &ar, const char label, Type value, int m, int n, int np)
	Add and load a required < Type > matrix parameter. More...

template<typename Type >
DMatrixParam< Type > &	loadDMatrix (Serializable::IArchive &ar, const char *label, DMatrix< Type > &matrix, int m, int n, bool isRequired)
	Add and load a DMatrixParam < Type > matrix parameter. More...

template<typename Type >
DMatrixParam< Type > &	loadDMatrix (Serializable::IArchive &ar, const char *label, DMatrix< Type > &matrix, int m, int n)
	Add and load a required DMatrixParam < Type > matrix parameter. More...

template<typename Type >
DSymmMatrixParam< Type > &	loadDSymmMatrix (Serializable::IArchive &ar, const char *label, DMatrix< Type > &matrix, int n, bool isRequired)
	Add and load a symmetric DSymmMatrixParam < Type > matrix parameter. More...

template<typename Type >
DSymmMatrixParam< Type > &	loadDSymmMatrix (Serializable::IArchive &ar, const char *label, DMatrix< Type > &matrix, int n)
	Add and load a required DSymmMatrixParam < Type > matrix parameter. More...

void	addParamComposite (ParamComposite &child, bool next=true)
	Add a child ParamComposite object to the format array. More...

Begin &	addBegin (const char *label)
	Add a Begin object representing a class name and bracket. More...

End &	addEnd ()
	Add a closing bracket. More...

Blank &	addBlank ()
	Create and add a new Blank object, representing a blank line. More...

std::string	className () const
	Get class name string. More...

bool	isRequired () const
	Is this ParamComposite required in the input file? More...

bool	isActive () const
	Is this parameter active? More...

Public Member Functions inherited from Util::ParamComponent
virtual	~ParamComponent ()
	Destructor. More...

void	setIndent (const ParamComponent &parent, bool next=true)
	Set indent level. More...

std::string	indent () const
	Return indent string for this object (string of spaces). More...

template<class Archive >
void	serialize (Archive &ar, const unsigned int version)
	Serialize this ParamComponent as a string. More...

Public Member Functions inherited from Util::Serializable
virtual	~Serializable ()
	Destructor. More...

Public Member Functions inherited from Util::MpiFileIo
	MpiFileIo ()
	Constructor. More...

	MpiFileIo (const MpiFileIo &other)
	Copy constructor. More...

bool	isIoProcessor () const
	Can this processor do file I/O ? More...

void	setIoCommunicator (MPI::Intracomm &communicator)
	Set the communicator. More...

void	clearCommunicator ()
	Clear (nullify) the communicator. More...

bool	hasIoCommunicator () const
	Does this object have an associated MPI communicator? More...

MPI::Intracomm &	ioCommunicator () const
	Get the MPI communicator by reference. More...

Additional Inherited Members
Public Types inherited from Util::Serializable
typedef BinaryFileOArchive	OArchive
	Type of output archive used by save method. More...

typedef BinaryFileIArchive	IArchive
	Type of input archive used by load method. More...

Static Public Member Functions inherited from Util::ParamComponent
static void	initStatic ()
	Initialize static echo member to false. More...

static void	setEcho (bool echo=true)
	Enable or disable echoing for all subclasses of ParamComponent. More...

static bool	echo ()
	Get echo parameter. More...

Protected Member Functions inherited from Tools::TrajectoryWriter
bool	isBinary () const
	Is the file format binary (true) or text (false)? More...

virtual void	writeHeader (std::ofstream &out)
	Write data that should appear once, at beginning of the file. More...

virtual void	writeFrame (std::ofstream &out, long iStep)=0
	Write data that should appear in every frame. More...

Boundary &	boundary ()
	Get Boundary by reference. More...

AtomStorage &	atoms ()
	Get AtomStorage by reference. More...

GroupStorage< 2 > &	bonds ()
	Get bond storage by reference. More...

GroupStorage< 3 > &	angles ()
	Get angle storage by reference. More...

GroupStorage< 4 > &	dihedrals ()
	Get dihedral storage by reference. More...

Protected Member Functions inherited from Tools::Analyzer
void	readInterval (std::istream &in)
	Read parameter interval from file. More...

void	readOutputFileName (std::istream &in)
	Read outputFileName from file. More...

Configuration &	configuration ()
	Get the parent Configuration by reference. More...

FileMaster &	fileMaster ()
	Get an associated FileMaster by reference. More...

const std::string &	outputFileName () const
	Return outputFileName string. More...

std::string	outputFileName (const std::string &suffix) const
	Return outputFileName string with added suffix. More...

Protected Member Functions inherited from Util::ParamComposite
void	setClassName (const char *className)
	Set class name string. More...

void	setIsRequired (bool isRequired)
	Set or unset the isActive flag. More...

void	setIsActive (bool isActive)
	Set or unset the isActive flag. More...

void	setParent (ParamComponent &param, bool next=true)
	Set this to the parent of a child component. More...

void	addComponent (ParamComponent &param, bool isLeaf=true)
	Add a new ParamComponent object to the format array. More...

template<typename Type >
ScalarParam< Type > &	add (std::istream &in, const char *label, Type &value, bool isRequired=true)
	Add a new required ScalarParam < Type > object. More...

template<typename Type >
CArrayParam< Type > &	addCArray (std::istream &in, const char label, Type value, int n, bool isRequired=true)
	Add (but do not read) a required C array parameter. More...

template<typename Type >
DArrayParam< Type > &	addDArray (std::istream &in, const char *label, DArray< Type > &array, int n, bool isRequired=true)
	Add (but do not read) a DArray < Type > parameter. More...

template<typename Type , int N>
FArrayParam< Type, N > &	addFArray (std::istream &in, const char *label, FArray< Type, N > &array, bool isRequired=true)
	Add (but do not read) a FArray < Type, N > array parameter. More...

template<typename Type >
CArray2DParam< Type > &	addCArray2D (std::istream &in, const char label, Type value, int m, int n, int np, bool isRequired=true)
	Add (but do not read) a CArray2DParam < Type > 2D C-array. More...

template<typename Type >
DMatrixParam< Type > &	addDMatrix (std::istream &in, const char *label, DMatrix< Type > &matrix, int m, int n, bool isRequired=true)
	Add and read a required DMatrix < Type > matrix parameter. More...

Protected Member Functions inherited from Util::ParamComponent
	ParamComponent ()
	Constructor. More...

	ParamComponent (const ParamComponent &other)
	Copy constructor. More...